N Type Crimp Jack LMR400
Picture is for illustration purposes only
| Part no : | 036.112.303 |
|---|---|
| Impedance : | 50 Ohm |
| Unit of Sale : | Each |
| Supplied as : | Single / Bulk |
| Weight : | 28g |
| 1+ | 10+ | 50+ | 100+ | 250+ | 500+ | 1000+ |
|---|---|---|---|---|---|---|
| £2.32 | £2.17 | £2.01 | £1.83 | £1.65 | £1.50 | £1.31 |
All prices are listed in GBP and exclude VAT and carriage.
For larger quantities, please call: +44 (0)1420-479830.
Product information
N Type Crimp Female LMR400 - Nickel Plated
Recommended Crimp Tool: 900-020
Please Note:
A Standard RG213 Crimp Tool will not Crimp this connector correctly. Although the Outer Ferrule remains
the same in dimension the Center Contact requires the use a 2.99mm A/F Hex.
If this Termination is going to be a "One time application" and you have a Standard RG213 tool then we
suggest you Solder the contact on and use the tool solely for the Ferrule.
Suitable cables
Belden 7810A, 7810R, 7810WB, 9913, 9913F7, H1000
BPE400 - CA400 - CNT400 - HP400 - HP400R
LBC400 - LBC400 Extraflex - LMR400 - LMR400 Ultra Flex
RA519 - RFC400 - WBC400 Low Loss Coax Cable